DAF LF — Auxiliary cab heater (air heating)

4. Set the day with the buttons (E) and (F). Once the day has stopped flashing, it has been stored. 5. Press button (B). The setting procedure is complete. Note: If the day does not need to be set, press button (B) twice after setting the time. Programming the switch-on time It is possible to program three switch-on times in the coming 24-hour period or one switch-on time in the coming 7 days. Selecting the memory position 1. Press button (C) once for the first memory position. Digit 1 and the default time setting (12.00) will appear in the display. 2. Press button (C) twice for the second memory position. Digit 2 and the default time setting (12.00) will appear in the display. 3.

Press button (C) three times for the third memory position. Digit 3 and the default time setting (12.00) will appear in the display. 4. Press button (C) until the memory display disappears. Programming the switch-on time for the coming 24 hours 1. Select a memory store. 2. Briefly press button (E) or (F). The time will start flashing. 3. Set the desired switch-on time with the buttons (E) and (F). Setting is only possible when the time is flashing. The switch-on time has been stored in the memory when the time is no longer flashing. 4. Press button (C) to select another place in the memory, or wait until the display shows the current time. This completes the programming. 5.

The activated memory store is visible in the display. The burner symbol is also flashing as a sign that the switch on-time has been programmed. Cab, Instruments and Controls 92