Crankshaft TCD 2013 2V W 05-05-01 Attention! Screws can be used a maximum 3 times with written documentation. Use socket wrench insert. ●Tighten all screws (1) of the main and fit bearing cov - ers. Stage 1: 1 50 Nm Stage 2: 60° Stage 3: 6 60° © 44241-0 Installing the big end bearing cap ●Pull con rods carefully on to the lifting journal. © 44242-0 ●Place lifting journal of the respective cylinder at bot - tom dead centre (BDC). Attention! Do not jam the con rods when turning the crankshaft. © 44243-0 © 02/2010 OBJ_DOKU-21758-001.fm 9/12