Deutz — Removing and installing the crankshaft

Crankshaft TCD 2013 2V W 05-05-01 ●Mount big end bearing cap. Attention! Note the assignment of the big end bearing cap. The identification numbers (1) on the con rod and the big end bearing cap must be identical and opposite to each other when assembled. 1 26519 26519 6 © 44244-0 ●Tighten new screws with rotation angle disc. Stage 1: 30 Nm Stage 2: 60° Stage 3: 60° © 44245-0 ●Unscrew screws (2). ●Remove turning gear (1). 1 2 © 44222-0 © 02/2010 OBJ_DOKU-21758-001.fm 10/12