Deutz — Checking the crankshaft

Crankshaft TCD 2013 2V W 05-05-02 Measuring the fit bearing width ●Set micrometer gauge to 38 mm. Balance the internal measuring device between the test surfaces of the micrometer gauge and set the dial gauge at the reversal point of the pointer to "0". 6 © 35825-2 ●Measure bearing width with internal measuring de - vice between thelay-on surfaces of the thrust rings. Standard 38 mm + 0.06 © 42606-0 Visual inspection ●Check the running surfaces (1) of the crankshaft sealing rings visually. ●Visually inspect gear wheel (2). 1 1 ●Install crankshaft. 2 W 05-05-01 © 42607-0 © 02/2010 OBJ_DOKU-21759-001.fm 4/4