Crankshaft TCD 2013 2V W 05-05-03 Checking the axial clearance of the crankshaft 8190 Standard tools: Magnetic measuring stand Micrometer gauge Internal measuring device Socket wrench insert 8035 W 01-03-01 W 05-05-01 W 09-02-02 Special tools: Dial gauge 100400 6 ●Remove front cover. W 01-03-01 ●Remove the gear case cover. W 09-02-02 ●Mount magnetic measuring stand. ●Insert dial gauge. ●Apply stylus to the crankshaft end with pre-tension. ●Press crankshaft in direction of arrow. ●Adjust dial gauge to "0". © 44179-0 ●Press crankshaft in direction of arrow. ●Read off measured value.
0,1 - 0,3 mm In case of deviating axial clearance, the permissible axial clearance should be set by changing the thrust ring halves. © 44180-0 © 02/2010 OBJ_DOKU-21760-001.fm 1/6