Crankshaft TCD 2013 2V W 05-05-03 ●Unscrew screws (1). Use socket wrench insert. 1 ●Remove bearing cap (2). ●Remove lower bearing shell. ●Remove both thrust ring halves (arrows). 2 6 1 © 44181-0 ●Remove both thrust ring halves (arrows). © 44182-0 ●Measure the wall thickness of the thrust ring halves. Standard 2,9 mm + 0.05 0 ●Select thrust ring halves according to measured val - ue. © 43504-0 © 02/2010 OBJ_DOKU-21760-001.fm 2/6