Deutz — Checking the axial clearance of the crankshaft

Crankshaft TCD 2013 2V W 05-05-03 ●Fix both thrust ring halves with a little grease to the bearing cap. Use lower thrust ring halves with guide lug (arrow). Install thrust ring halves according to mea - sured axial clearance. Bearing cap with identification “2“. 2 The oil grooves (1) face the crankshaft web face. 1 6 © 42663-0 ●Insert bearing cap (1). The gate (arrow) on the bearing cap faces the manifold side. 1 © 44185-0 ●Tighten screws (arrows). Stage 1: 50 Nm Stage 2: 60° Stage 3: 60° Attention! Screws can be used a maximum 3 times with written documentation. Use socket wrench insert. © 44186-0 © 02/2010 OBJ_DOKU-21760-001.fm 5/6