Crankshaft TCD 2013 2V W 05-05-03 ●Determine axial backlash. 0,1 - 0,3 mm ●Install crankshaft. W 05-05-01 6 © 35827-2 Make sure the clamping bushings (1) are in place. 1 © 44183-0 ●Install upper thrust ring halves according to meas - ured axial clearance. Oil grooves (1) of the thrust ring halves face the crankshaft web face (2). Insert thrust ring halves between crankcase and crankshaft web (arrow). 2 1 © 44184-0 © 02/2010 OBJ_DOKU-21760-001.fm 4/6 Calculation example Desired: Axial backlash Given: Measured: (a) = 38.6 mm (b) = 38.4 mm Calculation: Dimension (a) - Dimension (b) Result: = 0.2 mm