Deutz — Removing and installing the piston and con rod

Connecting rod TCD 2013 2V W 06-01-01 Removing and installing the piston and con rod Standard tools: Rotation angle disc 8190 W 07-02-02 W 08-03-01 W 16-01-01 Special tools: Piston ring compressor 130640 Liner holder 150180 Attention! The assignment of con rod and big end bearing cover must stay as it is. If con rod and big end bearing cover are assembled the wrong way around, the con rod will be unusable! Do not damage the fracture surfaces of the con rod and big end bearing cover! Collect leaking operating substances in suitable vessels and dispose of according to regulations. The engine oil and coolant should be added according to the operating manual.

6 Removing the piston and con rod ●Remove cylinder head. W 08-03-01 ●Remove oil suction pipe 2 W 16-01-01 ●Mount liner holder (2). ●Tighten screws (1). ●Pull out oil dipstick. 1 1 © 44260-0 © 02/2010 OBJ_DOKU-21761-001.fm 1/8