Connecting rod TCD 2013 2V W 06-01-01 Removing the piston ●Remove locking ring. ●Press out piston pin. ●Visually inspect the components. 6 © 44251-0 Completing con rod and piston ●Insert new locking ring. Ensure that the installation location is free from faults. © 44252-0 ●Insert con rod. The flywheel/crankshaft symbol (1) on the piston base must face to the right and the identification number (2) on the con rod must face upwards. 2 26519 1 © 44253-0 © 02/2010 OBJ_DOKU-21761-001.fm 3/8