Deutz — Removing and installing the piston and con rod

Connecting rod TCD 2013 2V W 06-01-01 ●Insert bearing shell in the respective big end bearing cap. Note the assignment of the bearing shells. The anti-rotation lock (1) must lock in groove (2). 1 2 6 © 44216-0 ●Arrange the piston ring joints with an offset of about 120° to each other. ●Check piston rings and piston ring grooves. W 07-02-02 © 42380-1 ●Lightly oil cylinder running surface, piston, piston rings and lifting bearing journal lightly. ●Clamp piston rings with piston ring compressor (1). Do not turn the piston rings any further. 1 © 44255-0 © 02/2010 OBJ_DOKU-21761-001.fm 5/8