Connecting rod TCD 2013 2V W 06-01-01 ●Tighten new screws with rotation angle disc. Stage 1: 30 Nm Stage 2: 60° Stage 3: 60° 6 © 44259-0 ●Insert oil dipstick. ●Unscrew screws (1). ●Remove the liner holder (2). 2 1 1 © 44260-0 ●Install oil suction pipe. W 16-01-01 ●Install cylinder head. W 08-03-01 © 44261-0 © 02/2010 OBJ_DOKU-21761-001.fm 7/8