Connecting rod TCD 2013 2V W 06-01-02 ●Insert internal measuring device. ●Balance the internal measuring device at the given measuring points and read off the measured value at the reversal point of the pointer. 42 mm + 0.05 + 0.04 Measuring points see diagram. ●Note the measured value, dimension (A). The dimension A is required to determine the piston bolt clearance. 6 © 34770-2 Checking diameter of the piston bolt ●Measure piston pin with micrometer gauge. 42 mm 0 - 0.006 ●Note the measured value, dimension B. The dimension B is required to determine the piston bolt clearance.
© 35908-2 Determining the piston bolt clearance The piston bolt clearance is given by the difference between the internal diameter of the small end bush (dimension A) and the piston bolt diameter (dimension B). 0,034 - 0,056 mm © 02/2010 OBJ_DOKU-21762-001.fm 2/8 Calculation example Desired: Piston pin clearance Given: Measured: (A) = 40.045 mm Calculation: (B) = 40.006 mm dimension (A) - dimension (B) Result: = 0.039 mm