Deutz — Checking the con rod

Connecting rod TCD 2013 2V W 06-01-02 Checking the con rod bearing bore Make sure the clamping bushings (1) are in place. 1 6 © 44440-0 ●Mount big end bearing cap. Attention! Note the assignment of the big end bearing cap. The identification numbers (1) on the con rod and the big end bearing cap must be identical and opposite to each other when assembled. 26519 26519 1 © 44212-0 ●Tighten screws alternately with rotation angle disc and socket wrench insert. Stage 1: 50 Nm Stage 2: 60° Stage 3: 60° © 44213-0 © 02/2010 OBJ_DOKU-21762-001.fm 3/8