Connecting rod TCD 2013 2V W 06-01-02 Checking the con rod ●Mount connecting rod on test instrument without bearing shells. A Attention! Aligning the con rod is not permissible. B ●Move test fork in direction of arrow. ●Check that the con rod is parallel. ●Permissible deviation from (A) to (B). 0,05 mm Distance between “A“ and “B“ = 100 mm. 6 © 30579-1 ●Move test fork in direction of arrow. ●Check the angle of the con rod. ●Permissible deviation from (C) to (D). 0,05 mm Distance between “C“ and “D“ = 100 mm C D © 30580-1 © 02/2010 OBJ_DOKU-21762-001.fm 8/8