Cylinder head TCD 2013 2V W 08-03-01 ●Hang cylinder head on suitable cross beam (1) and workshop crane. Align chains parallel to the cross beam. 1 ●Lift the cylinder head carefully from the crankcase. 6 © 44147-0 ●Remove the cylinder head gasket. ●Clean sealing surfaces. © 44148-0 Installing the cylinder head ●Check the overhang of the cylinder liner. W 01-05-01 ●Check piston overhang. W 08-03-02 © 44149-0 © 02/2010 OBJ_DOKU-21769-001.fm 3/8