Deutz — Removing and installing cylinder head

Cylinder head TCD 2013 2V W 08-03-01 ●Select cylinder head gasket according to the largest piston projection measured. 0,28 - 1 hole, cylinder head gasket 1.42 mm 0,54 - 2 hole, cylinder head gasket 1.52 mm 0,64 - 3 hole, cylinder head gasket 1.62 mm Example: Piston projection = 0.7 mm cor - responds to cylinder head gasket with 3 holes (arrow). 6 © 44154-0 ●Make sure the clamping bushings (arrows) are in place. © 44155-0 ●Fit a new cylinder head gasket. The sealing surfaces for the cylinder head gasket must be clean and free of oil. Label OBEN / TOP facing the cylinder head. © 44156-0 © 02/2010 OBJ_DOKU-21769-001.fm 4/8