Cylinder head TCD 2013 2V W 08-04-01 ●Oil the valve stem lightly. ●Insert the valve in the valve guide by turning with a slight pressure. Do not damage or press out the valve stem seal when inserting the valve. 6 © 44170-0 ●Insert valve spring (1). ●Insert valve spring plate (2). The closely wound end of the valve plate faces the cylinder head. 2 1 © 44171-0 ●Mount assembly lever. ●Press down the valve spring with the assembly lever and insert both tapper collets (1). Make sure the tapper collets fit correctly in the valve keyway. 1 © 44172-0 © 02/2010 OBJ_DOKU-21771-001.fm 4/6