Cylinder head TCD 2013 2V W 08-04-01 ●Remove assembly lever. ●Insert thrust washer (1). Ensure that the installation location is free from faults. 1 6 © 44165-0 ●Insert snap ring (arrow). Ensure that the installation location is free from faults. © 44173-0 ●Remove cylinder head from support bracket (1). ●Remove support bracket from base plate (2). ●Install cylinder head. W 08-03-01 1 2 © 44163-0 © 02/2010 OBJ_DOKU-21771-001.fm 5/6