Gearcase TCD 2013 2V W 09-02-02 ●Press up gearcase cover and align flush with the oil tray sealing surface (arrows). The oil tray sealing surface on the crankcase must face downwards. 6 © 44461-0 ●Tighten the screws according to the tightening se - quence. Note different tightening values. 11 12 10 2 1 13 ●Tighten scews (1) and (2). M16x60 70 Nm 14 ●Tighten scews (3) to (14). 30 Nm M8x35 5 7 6 3 8 9 4 © 44589-2 ●Tighten screws (15) to (17). M8x55 17 20 Nm 16 15 © 44590-2 © 02/2010 OBJ_DOKU-21776-001.fm 6/10