Gearcase TCD 2013 2V W 09-02-02 ●Clean sealing surfaces. The sealing surfaces must be dry and free from grease and dirt. ●Fill the ring groove (arrows) with packing compound. Use packing compound DEUTZ DW 48. Sealing bead thickness approx. 1.5 mm. 6 © 44462-0 ●Mount cap (1). ●Tighten screws (2). Note the installation position of the cap (1). Use M8 x 50 mm screws. Mount holder (arrow). Do not tighten screws. 2 2 1 © 44463-0 ●Clean sealing surfaces. ●Mount the new O-ring. ●Lightly oil O-ring. © 43983-0 © 02/2010 OBJ_DOKU-21776-001.fm 7/10