Deutz — Setting valve clearance (with or without removal of exhaust return module)

Control parts TCD 2013 2V W 11-01-01 Setting the inlet valve clearance ●Loosen lock nut (1). ●Press in the adjusting screw (2) to the stop. The rocker arm must touch the thrust washer of the spring cap (arrow). 2 1 6 © 44113-0 ●Set the rotation angle disc with a socket wrench in - sert at the adjusting screw. ●Fix magnet of rotation angle disc on cylinder head. ●Set the rotation angle disc in the direction of the ar - row to „0“. Do not rotate adjusting screw. © 44114-0 ●Turn back setting screw 90° in direction of arrow. 90° © 44115-0 © 02/2010 OBJ_DOKU-21779-001.fm 3/6