Deutz — Setting valve clearance (with or without removal of exhaust return module)

Control parts TCD 2013 2V W 11-01-01 ●Hold adjusting screw. ●Tighten locking nut (arrow) with box spanner. 20 Nm ●Remove rotation angle disc. 6 © 44116-0 Setting the exhaust valve clearance ●Loosen lock nut (1). ●Press in the adjusting screw (2) to the stop. The rocker arm must touch the thrust washer of the spring cap (arrow). 2 1 © 44117-0 ●Set the rotation angle disc on the adjusting screw with a screwdriver insert for slotted screws. ●Fix magnet of rotation angle disc on cylinder head. ●Set the rotation angle disc in the direction of the ar - row to „0“. Do not rotate adjusting screw. © 44118-0 © 02/2010 OBJ_DOKU-21779-001.fm 4/6