Deutz — Setting valve clearance (with exhaust return module installed)

Control parts TCD 2013 2V W 11-01-01 ●Turn back setting screw 150° in direction of arrow. 150° 6 © 43048-0 ●Hold adjusting screw. ●Tighten locking nut (arrow) with box spanner. 20 Nm ●Remove rotation angle disc. ●Set all other valves. see page: 1, 4-cylinder 2, 6-cylinder © 43049-0 Setting the control piston clearance The control piston clearance (X) must be set after setting the valve clearance. © 43832-3 © 02/2010 OBJ_DOKU-21780-001.fm 5/8