Control parts TCD 2013 2V W 11-01-01 ●Turn crankshaft using the turning gear until the valve overlap of cylinder 1 is reached. ●Set control piston according to order of setting. see page: 1, 4-cylinder 2, 6-cylinder 6 © 44110-0 ●Loosen lock nut (1). ●Press in the adjusting screw (2) to the stop. The rocker arm must touch the thrust washer of the spring cap (arrow). 2 1 © 44122-0 ●Set the rotation angle disc on the adjusting screw with a screwdriver insert for hexagon socket head screw. ●Fix magnet of rotation angle disc on cylinder head. ●Set the rotation angle disc in the direction of the ar - row to „0“. Do not rotate adjusting screw. © 44123-0 © 02/2010 OBJ_DOKU-21780-001.fm 6/8