Deutz — Disassembling, assembling and checking the rocker arm and rocker arm bracket

Control parts TCD 2013 2V W 11-02-02 Checking the rocker arm ●Measure rocker arm bore. Inlet 21,02 mm + 0.033 0 Outlet 21,02 mm + 0.033 0 When the wear limit is reached the rocker arm must be renewed. 6 © 39032-1 ●Loosen lock nut (1). ●Hold adjusting screw (2). ●Unscrew adjusting screw (2). ●Loosen lock nut (3). 2 3 ●Hold adjusting screw (4). ●Unscrew adjusting screw (4). Attention! Pay attention to versions of the adjusting screws (slotted, hexagonal, hexagonal socket). 4 1 Lay out components in the order in which they should be installed. © 42556-0 ●Check components for visible signs of wear. ●Check oil channels (arrows) for free passage. © 42557-0 © 02/2010 OBJ_DOKU-21782-001.fm 2/4