Deutz — Disassembling, assembling and checking the rocker arm and rocker arm bracket

Control parts TCD 2013 2V W 11-02-02 ●Screw in setting screw (1). ●Loosen lock nuts (2). 2 1 6 © 43011-0 Checking the rocker arm pin ●Measure the diameter of journals with the microme - ter gauge. 21 mm 0 - 0.021 When the wear limit is reached the rocker arm bracket must be replaced. © 44139-0 Assembling the rocker arm bracket ●Lightly oil the rocker arm pin. ●Push rocker arm (1) onto rocker arm pin. ●Push rocker arm (2) onto rocker arm pin. 2 The rocker arm's sliding surface (3) must face the threaded bore (arrow). 1 Mount the rocker arm (1) on the outlet side. Mount the rocker arm (2) on the inlet side. 3 © 44140-0 © 02/2010 OBJ_DOKU-21782-001.fm 3/4