High-pressure pump TCD 2013 2V W 17-01-01 ●Insert control block. ●Pre-assemble screws loosely. Pay attention to different screw lengths. M8 x 75 mm (2) 2 1 M8 x 85 mm (1) Do not tighten screws. 6 © 44003-0 ●Install fuel pipe. Insert hollow screws (1) and (2) with new sealing rings tension-free. Use new sealing rings. Pay attention to different screws: Hollow screw M14 (1) Hollow screws M12 (2) 2 2 1 © 44004-0 ●Mount fuel pipe. ●Insert hollow screws (1) with new sealing rings ten - sion-free. Use new sealing rings. Do not tighten hollow screws. 1 2 ●Position pipe clip. ●Fasten screw (2) tension-free. Do not tighten the screw. 1 © 44005-0 © 02/2010 OBJ_DOKU-21786-001.fm 4/8