High-pressure pump TCD 2013 2V W 17-01-01 ●Tighten hollow screw (1). 39 Nm ●Tighten hollow screws (2). 29 Nm 2 2 1 6 © 44006-0 ●Tighten hollow screws (1). 39 Nm ●Tighten screw (2). 20 Nm 2 ●Check the fuel pipes for perfect installation position. 1 1 © 44007-0 Attention! Observe the following order of tightening. 1 ●Tighten screw (1). 20 Nm ●Tighten screw (2). 20 Nm Attention! Do not bend high pressure and fuel pipe. © 44008-0 © 02/2010 OBJ_DOKU-21786-001.fm 5/8