Deutz — Removing and installing the high-pressure pump (Installation position A)

High-pressure pump TCD 2013 2V W 17-01-04 Danger! Wait 30 seconds after switching off the engine before working on the fuel system. ●Remove control block. W 17-01-01 6 © 43954-0 ●Unscrew hollow screws (1). ●Remove fuel pipe (2) and sealing rings. Collect draining fuel and dispose of according to regulations. 1 2 © 43955-0 Collect draining fuel and dispose of according to regulations. Support the pipe connection of the high pressure pump. ●Remove high pressure pipe (1) with special wrench. 1 © 43956-0 © 02/2010 OBJ_DOKU-21787-001.fm 2/10