High-pressure pump TCD 2013 2V W 17-01-04 ●Loosen screws (1) evenly Loosen screws evenly to avoid jamming the high-pressure pump. If necessary, turn the crankshaft with turn- over gear in the direction of rotation of the engine until the high-pressure pump is felt to release. 1 ●Unscrew screws (1) evenly. ●Remove high-pressure pump (2). 1 2 6 © 43957-0 ●Carefully remove the O-ring (1) from the high-pres - sure pump with the disassembly tool. Attention! Do not damage the high-pressure pump. 1 © 43328-0 ●Pull out roller tappet (1) with special pliers. Attention! Do not damage the roller tappet! Do not use magnetic tools for removing the roller tappet. ●Visually inspect the components.
1 © 43997-0 © 02/2010 OBJ_DOKU-21787-001.fm 3/10