High-pressure pump TCD 2013 2V W 17-01-04 Installing the high-pressure pump ●Turn the crankshaft with the turn-over gear until the cam for the high-pressure pump is on the cam base circle (arrow). Roller tappet stroke is less than 0.5 mm. 6 © 42816-0 ●Oil roller tappet lightly and insert carefully with spe - cial pliers. The guide pin (1) on the roller tappet must grip in the groove (2). 1 2 © 42817-0 ●Push assembly guide (1) onto high-pressure pump. ●Push the new O-ring (2) onto the assembly guide. 1 2 © 43329-0 © 02/2010 OBJ_DOKU-21787-001.fm 4/10