Deutz — Removing and installing the high-pressure pump (Installation position A)

High-pressure pump TCD 2013 2V W 17-01-04 ●Install control block. W 17-01-01 ●Tighten screws (arrows). Stage 1: 10 Nm Stage 2: 50 Nm 6 © 43979-0 Attention! The high-pressure line must always be renewed after disassembly. Install high pressure line without tension. 1 ●Mount new high-pressure line on high-pressure pump and rail. ●Screw on union nuts (1). Do not tighten union nuts. ●Check the high-pressure line for perfect installation position. 1 © 43980-0 Installation position of vibration damper. Attention! Pay attention to installation position. Do not turn vibration damper (1). (1) Vibration damper 1 X Dimension X 2 Diameter:

32 mm (2) Connection rail (3) Connection high pressure pump 3 © 48208-0 © 02/2010 OBJ_DOKU-21787-001.fm 6/10