Deutz — Removing and installing the high-pressure pump (Installation position B)

High-pressure pump TCD 2013 2V W 17-01-05 Attention! Install high pressure line without tension. Pay attention to alignment of the high pres - sure pipes. Pipes which touch the bore (1) of the union nut must be renewed. 1 6 © 43995-1 ●Tighten union nuts (arrows) with special wrench. Stage 1: 10 Nm Stage 2: 60° + 15° ●Check the high-pressure line for perfect installation position. © 43996-0 ●Plug in the cable plug (1). Ensure that the connection is perfect. Bleed the fuel system via the manual fuel pump on the fuel pre-filter according to the operation manual. 1 © 43986-0 © 02/2010 OBJ_DOKU-21788-001.fm 8/10