High-pressure pump TCD 2013 2V W 17-01-05 Technical Data Tightening specifications 6 For the tightening procedure according to torque using a torque wrench, a maximum variation of the tightening torque of +/- 10% is permissible. © 02/2010 OBJ_DOKU-21788-001.fm 10/10 D no. Name Screw type Notes / Remark Value A07 003 Injection pipe on rail and injector, High pressure pipe on high pressure pump and rail Union nut Stage 1: Observe assembly specification. Use new pipe. 10 Nm A07 003 Injection pipe on rail and injector, High pressure pipe on high pressure pump and rail Union nut Stage 2: 60° +15° A07 031 High pressure pump to crankcase M10x30-10.9 Stage 1:
Screws oiled 10 Nm A07 031 High pressure pump to crankcase M10x30-10.9 Stage 2: 50 Nm A12 092 Pipe union, pipe diameter 8 mm, ring piece Hollow screw M12x1.5 29 Nm A12 093 Pipe union, pipe diameter 10 mm, ring piece Hollow screw M14x1.5 39 Nm