Deutz — Removing and installing the injector

Injector TCD 2013 2V W 19-01-01 ●Push the O-ring (1) with assembly sleeve (2) up to the groove (3). 1 3 2 6 © 43029-0 ●Lightly oil round sealing ring (1). ●Mount new sealing ring (2) on injector. 1 2 © 42987-1 Attention! Before installing the injector, combustion residue must be cleaned carefully from the bore on the cylinder head. Suck off dirt particles. Install injector without tension. ●Insert injector carefully in the cylinder head. © 42988-0 © 02/2010 OBJ_DOKU-21789-001.fm 6/10