Deutz — 4.2 Tightening specifications

Technical data A01 011 Exhaust gas return module on cylinder head ID no. Name Screw type A01 004 Cylinder head cowling on cylinder head A01 012 Locking nut setting screw exhaust gas return mo - dule A01 013 Solenoid valve (exhaust gas return) on cylinder head A03 030 Oil pan on crankcase A03 031 Screw cap on oil pan M18x1.5 A03 060 Crankcase breather on cylinder head 4 A02 020 Big end bearing cap on con rod A02 010 Main bearing on crankcase A03 020 Front cover on crankcase © 02/2010 OBJ_DOKU-21741-001.fm 12/18 ID no. Name Screw type Notes / Remarks Series Pre-tensio- ning value Post- clamping value A01 004 Cylinder head cowling on cylinder head Hood must be free from grease and lubricant.

TCD 2013 2V 13 Nm A01 011 Exhaust gas return module on cylinder head Observe tightening sequence. TCD 2013 2V 10 Nm 30 Nm A01 012 Locking nut setting screw exhaust gas return mo- dule TCD 2013 2V 20 Nm A01 013 Solenoid valve (exhaust gas return) on cylinder head TCD 2013 2V 24 Nm A02 010 Main bearing on crankcase Can be used 3 times if documented in writing otherwi- se use new screws every time they are loosened. TCD 2013 2V 50 Nm +60° +60° A02 020 Big end bearing cap on con rod Observe assembly specifica- tion. Use new screws every time they are loosened. Screws oiled TCD 2013 2V 30 Nm +60° +60° A03 020 Front cover on crankcase Observe tightening sequence. Observe assembly specifica- tion.

Wet rotors with engine oil befo- re assembly. TCD 2013 2V 3 Nm 21 Nm A03 030 Oil pan on crankcase Observe tightening sequence. Note different screw lengths. TCD 2013 2V 30 Nm A03 031 Screw cap on oil pan M18x1.5 Cu sealing ring TCD 2013 2V 55 Nm A03 060 Crankcase breather on cylinder head TCD 2013 2V 20 Nm