Deutz — Removing and installing the fan drive

Fan drive TCD 2013 2V W 39-02-01 ●Insert holding pin (1). The running direction must be marked when the V-rib belt is to be re-used. 1 6 © 42837-0 ●Mark the running direction of the V-rib belt. ●Remove V-rib belt. The running direction must be marked when the V-rib belt is to be re-used. First remove the V-rib belt from the V-rib belt pulley (1) 1 © 42853-0 ●Unscrew screws (1). ●Remove fan drive with V-rib belt pulley. 1 Note installation position of the fan drive. ●Visually inspect the components. 1 © 42855-0 © 02/2010 OBJ_DOKU-21801-001.fm 2/4