Fan drive TCD 2013 2V W 39-02-01 Installing the fan drive ●Install fan drive with V-rib belt pulley. 1 ●Tighten screws (1). 60 Nm Note installation position of the fan drive. 1 6 © 42856-0 ●Fit the V-rib belt according to the running direction. Place the V-rib belt over the V-rib belt pul - ley (1) last. Ensure that the installation location is free from faults. 1 © 42853-0 ●Hold the belt tensioner. ●Remove the retaining pin. ●Relieve the belt tightener. The belt tightener clamps the V-rib belt automatically. © 42840-0 © 02/2010 OBJ_DOKU-21801-001.fm 3/4