Front cover TCD 2013 2V W 01-02-02 Assembling/disassembling shaft sleeve on the crankshaft (opposite side to flywheel) Standard tools W 01-02-01 W 01-03-01 W 16-01-01 Packing compound DEUTZ DW 74 The following work procedure is described for series 2012 as an example. The pro - cedure for the other engines listed above is the same. 6 Installing the shaft sleeve ●Remove the crankshaft sealing ring. W 01-02-01 © 39876-0 ●Visually inspect the crankshaft journal. ●Clean the crankshaft journal carefully. Unevenness such as running marks, notches or very rough surfaces can cause lubricating oil leaks between the crankshaft and the shaft sleeve. ●Repair unevenness with packing compound.
1 ●Remove clamping bushing (1). © 44875-0 © 02/2010 OBJ_DOKU-21746-001.fm 1/4