Deutz — Assembling/disassembling shaft sleeve on the crankshaft (opposite side to flywheel)

Front cover TCD 2013 2V W 01-02-02 Removing the shaft sleeve ●Remove the crankshaft sealing ring. W 01-02-01 ●Remove oil suction pipe W 16-01-01 6 © 39871-0 ●Unscrew screws (1). ●Remove front cover. 1 1 1 1 1 © 44542-0 ●Place two mounting levers on the gate of the front cover (arrows). Attention! Do not damage the sealing surfaces. © 39873-0 © 02/2010 OBJ_DOKU-21746-001.fm 3/4