SECTION 3 Page 5 . When operating a machine in water or fording streams, survey the water depth, ground condition and velocitv of the water in advance. Do not take the machine in water exceeding the allowable depth (up to the underside of the axle housing). - The overall height of the machine is restricted by tunnels, roof height or overhead electric wires, so check first whether the jobsite is safe. Be par- ticularly careful when working near power lines as electric shock can be caused if the machine touches the electric cables. BEFORE STARTING OPERATION CHECK BEFORE STARTING - Carry out checks before starting the machine.
If - any problem is found, do not start the engine, but inform the foreman immediately. Always keep the machine in good condition.