SECTION 3 SAFETY AND OPERATION Page 8 Before starting work, test drive the machine in a safe place and check that the transmission, brakes, accelerator, and steering are working properly. At the same time, check that there is not abnormal noise or vibration, or any abnor- mality in the instruments and gauges. CHECKS AFTER STARTING THE ENGINE Always sit in the operator’s seat when operating the machine. DURING OPERATION Do not allow anyone except the operator on the machine. Always be aware of the operating capacity of the machine. Using the machine to do work beyond its capacity will not only damage the machine, but may even cause unexpected accidents.
The machine condition can be judged from many factors. Changes in the gauges, sound vibration, exhaust gas color or response of the control levers can indicate the occurrence of some disorder. If anv disorder occurs. Dark the machine immediately in a safe place and’take appropriate action.