SECTION 3 SAFETY AND OPERATION Page 16 BEFORE MAINTENANCE . Before starting work, stop the machine on a firm, level surface, and use blocks to keep the machine from moving during operations. r . Lower the bucket to the ground. If this is impos- sible, use the safety pin and blocks to hold the work equipment securely in position. In addition, apply the locks to all control levers. . Always lock the front and rear frames before inspecting and servicing the machine. (In articulate frame model) . Remove all oil and mud from the machine. In particular, be sure that the steps, hand grips, and the floor of the operator’s compartment are clean. . Always use the standard ROPS equipment.
Do not modify the ROPS equipment.