SECTION 1 Page 4 OPERATION CHECK MONITOR GROUP (Check items before starting) If there is any abnormality, the appropriate monitor lamp will flash. * When the engine is started, these monitor lamps will go off even if there are abnormalities CAUTION MONITOR GROUP (Caution items) If any abnormality occurs while the engine is running, the appropriate monitor lamp will flash to indicate the abnormalcty * Even if any monitor lamp flashes, the machine can operate, but it should be repaired as soon as possible CAUTION MONITOR GROUP (Emergency stop items) If any abnormality occurs while the engine is running.
the appropriate monitor lamp will flash and the alarm buzzer will sound intermittently at the same time METER GROUP * If any monitor lamp flashes. stop the engine or run it at a low idling speed, and repair it immediately. This group consists of air pressure gauge, engine water temperature gauge. torque converter oil temperature gauge, fuel gauge, speedometer, service meter and pilot display. WARNING LAMP The warning lamp will flash and the alarm buzzer will sound when there is an abnormality in any C group item or when the parking brake is applied, but the directional lever is not at neutral. The warning lamp will flash when there is an abnormality in any B group item