SECTION 1 Page 7 OPERATION CAUTION MONITOR GROUP (Emergency stop items) If any abnormality occurs while the engine is running, the appropriate monitor lamp and the warning lamp will flash and ihe alarm b&er will sound intermittently at the same time: Brake Line Failure Monitor This monitor indicates a drop in the brake oil pressure when the brakes are operated. If the lamp flashes, stop the machine immediately and check the brake system. l After checking and repair of brake system, push in over-stroke sensor rod on the brake chamber. If this operation is not done, a buzzer and lamp will continue to warn of brake line trouble. I - This monitor indicates a low engine oil pressure.
Engine Oil Pressure Monitor If the lamp flashes, the engine oil pressure is below the lower limit. Immediately stop the engine. l This monitor lamp flashes and the alarm buzzer sounds, when the starting switch is turned to ON immediately after the engine is started or immediately before the engine is stopped. It does not indicate an abnormality. Coolant Level Monitor This monitor indicates a low radiator coolant level. Check the coolant level when the monitor lamp flashes, stop engine and add water as required.