OPERATION SECTION 1 Page 23 AIR CLEANER SERVICE INDICATOR This device indicates clogging of the air cleaner element. When red piston (1) appears in the transparent par? of this indicator, the element is clogged. Immediately clean 1 After cleaning, push indicator button (2) to return red piston to original position. element. Dust indicator is on air cleaner bracket in engine hood. SAFETY BAR The safety bar is used during maintenance or when transporting the machine. It locks the front frame and rear frame, and prevents the front and rear frames from bending. WARNING! Always use the safety bar for maintenance or when transporting the machine. WARNING!
Always remove the safety bar during normal travel operations. This lever is used to operate the lift arm and the bucket. WORK EQUIPMENT CONTROL LEVER (MONO-LEVER TYPE) Raise Hold: The lift arm and the bucket are kept in the same position. Lower Float: The lift arm moves freely under external force. Tilt Dump When the work equipment control lever is pulled further from 1 position, the lever is stopped in this position until the lift arm reaches the preset position of kick-out, and the lever is backed to hold position.
Dump When the work equipment control lever is pulled further from 5 position, the lever is stopped in this position until the bucket reaches the preset position of bucket positioner, and the lever is backed to hold position.