After sfartina make the followinq checks I CHECKS AFTER STARTING 1 Depress accelerator pedal (1) lightly and run the engine with no load at midrange speed for about 3 to 5 minutes. 2. After warm-up run is completed, check monitorlamps for proper operation. * Continue to run the engine at light load until the green ranges of the engine water temperature gauge and torque converter oil gauge light. 3 Check if the exhaust color is normal or whether there is any abnormal noise or vibration. * Avoid abruptly accelerating the engine until the completion of warm-up. * Do not run for more than 10 minutes at low idling or at high idling.
TO MOVE THE MACHINE OFF 1 Check that the warning item is not displayed on the monitor panel. 2 Free the safety lock for work equipment control lever. Bring the work equipment in the traveling posture. 3 Depress right brake pedal (1) and!urn parking brake switch (2) to OFF (release) to release the parking brake. * When the parking brake is applied with parking brake switch (2) put in OFF, put switch (2) to ON and return it to OFF again. 4 Set speed contrcl lever (3) and directional lever (4) to the dewed position. 5 Release right brake pedal (t), then depress accelerator pedal (5) to move the machine off WARNING!
If the machine has to be started on a slope, always turn the trans- mission cut-off selector switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start the machine off slowly.