Komatsu — SAFETY LOCK USAGE

OPERATION 8. Using safety lock (3) in the operator’s cab, lock the loader control before proceeding with any repair or service operations. 9. When your work is completed, unlock safety lock (3) in the opera- tor’s cab and raise the front end loader up slightly to relive tension on the cylinder lock. 10. Carefully remove the small pin and the safety pin (2). With both hands, remove the cylinder lock (1) completely. 11. Lower the front end loader back down to the ground completely. 12. Re-install the cylinder safety lock (1) back in the storage location on the left lift arm shown in illustration (B) Always keep the cylinder safety lock with the machine.

Never use a substitute or damaged cylinder lock. If it is missing or damaged have it replaced immediately. WB140-2N, WB150-2N 2-45