Komatsu — MAINTENANCE PLAN

MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION Perform these operations together with those to be initiated every “250 HOURS”. MAINTENANCE MAINTENANCE EVERY 250 HOURS OF OPERATION MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION Only for machines in which synthetic biodegradable oil type HEES is used. Perform these operations together with those to be initiated every “500 HOURS”.

WB140-2N, WB150-2N 3-23 Item Description Operation Page a Front axle Change oil 3-47 b Rear axle Change oil 3-48 c Hydraulic transmission Change oil 3-49 d Hydraulic transmission filter Change 3-50 e Engine valves Check clearance, (adjust) 3-50 f Hydraulic oil drain filter Change 3-51 Item Description Operation Page a Fan belt Check conditions and tension, (adjust) 3-36 b Radiators Clean outside 3-37 c Battery Check electrolyte level, (add fluid) 3-37 d Front axle Check levels, (add oil) 3-38 e Rear axle Check levels, (add oil) 3-38 f Hydraulic transmission Check level, (add oil) 3-39 g Front and rear wheels Check lug nut tightening 3-39 Item Description Operation Page a Hydraulic oil and suction filter (Only for machines with synthetic biodegradable oil) Change oil and clean filter 3-40